Hello
After a long search I have finally found a ViewfinderBox ,
which contains a Readon pro 128 with 32mb.
During the first test run it worked, because an old firmware was installed (V1.63) I wanted to update it with v1.78.
This was the latest version according to John's website.
As stated in Read me I did the whole thing in supervisor mode.
started.
After selecting the Podule slot, unfortunately not much happened, the slot number was accepted
was accepted but it did not go any further, now I have the problem that the computer does not start up with the Viewfinder plugged in and with a DataAbort:
Abort on data transfer at &0222CD60 (Error Number &80000002)
stops.
Risc OS 4.02 is installed
I hope you can help me
Greetings
Thomas
After a long search I have finally found a ViewfinderBox ,
which contains a Readon pro 128 with 32mb.
During the first test run it worked, because an old firmware was installed (V1.63) I wanted to update it with v1.78.
This was the latest version according to John's website.
As stated in Read me I did the whole thing in supervisor mode.
started.
After selecting the Podule slot, unfortunately not much happened, the slot number was accepted
was accepted but it did not go any further, now I have the problem that the computer does not start up with the Viewfinder plugged in and with a DataAbort:
Abort on data transfer at &0222CD60 (Error Number &80000002)
stops.
Risc OS 4.02 is installed
I hope you can help me
Greetings
Thomas
Statistics: Posted by fritzwalter — Sat May 25, 2024 10:23 pm